{{ 'fb_in_app_browser_popup.desc' | translate }} {{ 'fb_in_app_browser_popup.copy_link' | translate }}
{{ 'in_app_browser_popup.desc' | translate }}
UHF wireless microphone SK750,there are two models to choose : 1tow1 and 1tow2,Equipped with an usb charging cable
Not enough stock.
Your item was not added to your cart.
Not enough stock.
Please adjust your quantity.
{{'products.quick_cart.out_of_number_hint'| translate}}
{{'product.preorder_limit.hint'| translate}}
Limit {{ product.max_order_quantity }} per order.
Only {{ quantityOfStock }} item(s) left.
1tow2:
Receiver, transmitter, Mac.Kefeng wool single*2,3 turn3 line,3 turn4 line,1 tow3 charge line, manual,color box superheated shrinkage film,Weight :0.26
1 tow1:
Receiver, transmitter, Mike.Wind wool single, 3 turn 3 line, 3 turn 4 line, 1 tow
Two charging lines, instructions, colors.box superheated shrinkage film,Weight:0.22kg
TX (transmitter)
1. Frequency range 610.50 to 669.50 MHz
2. Number of channels A and B 30 (conservative values) ID
Code changes randomly in each pair.
Frequency range set by the manufacturer.
3. Frequency Locking of Oscillating Mode DSP Chip
Frequency stability ± 10 ppm
5. RF Power 10 dBm
6. Audio Response 40-1800Hz
7. Deformation ≤ 0.5%
8. Battery Specification Built-in 3.7V Lithium Polymer Battery
9. Update time of 3 hours (depending on battery type and capacity)
RX (Receiver)
1. Frequency range 610.50 to 669.50 MHz
2. Channel number A.B3 per channel (conservative)
value), the ID code will be changed randomly
within the frequency range set by the manufacturer.
3. Frequency Locking of Oscillating Mode DSP Chip
4. Rate stability ± 10 ppm
5.Receiving sensitivity-95~-71dBm
6. Audio Response 40-1800Hz
7. Deformation ≤ 0.5%
Signal-to-noise ratio ≥ 90 dB
9. Audio output 350 mV (max)
10. Battery Specification Built-in 3.7V Lithium Polymer Battery
11. Update time delayed by one 6 hours; two or three hours
(depending on battery type and capacity)